Listening to the other external components – Kenwood KDC-208U User Manual

Page 12

Preparation : Make sure [ON1] or [ON2] is selected for [BUILTIN AUX]. (page 6)

3.5 mm (3/16") stereo mini plug
(optional accessory)

Portable audio device

(optional accessory)

Auxiliary input jack

Listening to the other external
components

1 Press SRC to select “AUX.”
2 Turn on the external component and

start playing.

3 Turn the volume knob to adjust the

volume.

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to
observe this precaution may result in damage to the monitor or unit.

Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a
cotton swab or cloth.

Handling discs

Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
When removing discs from this unit, pull them out horizontally.
Remove the rims from the center hole and disc edge before inserting a disc.

EN02-15_KDC-248U[K]5.indd 12

8/24/10 5:11:30 PM