Kenwood KDC-208U - Manual (Page 10)

10
Alphabet Search and My Playlist
for iPod
Selecting a song by alphabet
1 Press to enter Music Search mode.
“SEARCH” appears.
2 Turn the volume knob to select a
category, then press to confirm.
3 Press again to enter alphabet search
mode.
“SEARCH <– – –>” appears.
4 Turn the volume knob to select the
character to be searched for.
5 Press
4 / ¢ to move to the entry
position.
You can enter up to three characters.
6 Press the volume knob to start
searching.
To cancel the Alphabet Search mode, press
and hold .
A longer searching time is required if there
are many songs or playlists in the iPod.
To search for a character other than A to Z
and 0 to 9, enter only “ * ”.
The article (a, an, the) of songs name will
be skipped during search.
Registering songs in the playlist
1 Select and play the song you want to
register. (page 9)
2 Press and hold number button
5 (MEMO MY LIST) to register.
“## STORED” (registration number)
appears.
You can register up to 10 songs. “MEMORY
FULL” appears, if you try to register the
eleventh song.
If you attempt to register a song from
a different iPod, “NO INFO” followed by
“MPLIST DEL” appears.
To delete the playlist, turn the volume knob
to select “YES,” then press to confirm.
You can also register the song displayed in
the Music Search mode by following the
same procedure.
Do not register Podcasts.
Functions of KDC-248U/ KDC-MP248U with iPod
Discs that cannot be used
Discs that are not round.
Discs with coloring on the recording
surface or discs that are dirty.
You cannot play a Recordable/ReWritable
disc that has not been finalized. (For the
finalization process refer to your disc
writing software, and your disc recorder
instruction manual.)
3-inch CD cannot be used. Attempt
to insert using an adapter can cause
malfunction.
About USB device
This unit can play MP3/WMA files stored
on a USB mass storage class device.
Install the USB device in the place where
it will not prevent you from driving your
vehicle properly.
You cannot connect a USB device via a
USB hub and Multi Card Reader.
Make sure all important data has been
backed up to avoid losing the data.
Connecting a cable whose total length is
longer than 5 m can result in abnormal
playback.
About “KENWOOD Music Editor”
This unit supports the PC application
“KENWOOD Music Editor Light ver1.0” or
later.
When you use the audio file with
database information added by the
“KENWOOD Music Editor Light ver1.0,”
you can search a file by title, album or
artist name using Music Search.
In the Instruction manual, the term
“USB device” is used to mean the device
that contains audio files with database
information added with KENWOOD
Music Editor.
“KENWOOD Music Editor Light ver1.0” is
available from the following web site:
www.kenwood.com/cs/ce/
For further information on “KENWOOD
Music Editor Light ver1.0,” refer to the site
above or the application help.
EN02-15_KDC-248U[K]f.indd 10 EN02-15_KDC-248U[K]f.indd 10 9/1/10 11:29:16 AM 9/1/10 11:29:16 AM