Kenwood KDC-208U - Manual (Page 11)

11
ENGLISH
Playing a song on the playlist
1 Press number button 5 (MEMO MY LIST)
to display the playlist.
“MY PLAYLIST” appears.
2 Turn the volume knob to select the song
you want, then press to confirm.
Random play cannot be performed during
playback of a song in the playlist.
Deleting a song on the playlist
1 Press number button 5 (MEMO MY LIST)
to display the playlist.
“MY PLAYLIST” appears.
2 Turn the volume knob to select the song
you want to delete, then press and hold
the volume knob.
3 Turn the volume knob to select
“DELETE ONE” or “DELETE ALL,” then
press to confirm.
Select “DELETE ALL” to delete all the songs
in the playlist.
4 Turn the volume knob to select “YES,”
then press to confirm.
“COMPLETE” appears.
iPod control by Hand Mode
Press and hold iPod to enter iPod mode.
HANDS ON :
Control iPod from the iPod. “iPod MODE”
appears on the display.
HANDS OFF: Control iPod from the unit.
Adjust [SETTINGS] mode settings
While listening to an iPod...
1 Press the volume knob to enter
[FUNCTION] mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to make a
selection, then press to confirm.
See the following table for selection.
4 Hold
to finish the procedure.
Item Selectable setting (Preset: *)
SKIP SEARCH 0.5% */ 1%/ 5%/ 10%: Sets the ratio of
skip when searching for a song in Music
Search mode.
(Holding
4 / ¢ skips songs at 10%
regardless of the setting made.)
MPLIST DEL YES: Deletes the saved My Playlist. ; NO *:
Cancels.
About compatible iPod/iPhone
Made for
– iPod touch (3rd generation)
– iPod touch (2nd generation)
– iPod touch (1st generation)
–
iPod classic
– iPod with video
– iPod nano (5th generation)
– iPod nano (4th generation)
– iPod nano (3rd generation)
– iPod nano (2nd generation)
– iPod nano (1st generation)
–
iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
For the latest compatible list and
software version of iPod/iPhone, see:
www.kenwood.com/cs/ce/ipod
If you start playback after connecting the
iPod, the music that has been played by
the iPod is played first.
In this case, “RESUMING” is displayed
without displaying a folder name, etc.
Changing the browse item will display a
correct title, etc.
You cannot operate iPod if “KENWOOD”
or “✓” displayed on iPod.
Functions for KDC-248U/ KDC-MP248U with iPod
EN02-15_KDC-248U[K]f.indd 11 EN02-15_KDC-248U[K]f.indd 11 9/1/10 11:29:16 AM 9/1/10 11:29:16 AM