Cd/external disc control features, Playing cds – Kenwood KDC-MP8017 User Manual

Page 18

Playing CDs:

Press the release button to slide open the faceplate, showing
the CD insertion slot.
Holding the CD with the labeled side facing up, insert it in the
slot. The CD will start playing. Push back the bottom of the
faceplate with your hand until it locks.
The IN indicator will light when a CD has been inserted.

When inserting a CD, make sure the CD has been completely
drawn in before pushing back the faceplate. Failing to do so
might scratch the CD.

Playing CDs Already Inserted:

Press the SRC (source) button repeatedly to select the CD
mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.

Pausing and Restarting CD Play:

Press the

38 button to make the disc pause.

Press the same button again to start play again.

Eject:

Press the release button and slide open the faceplate.
Press the

0 button.

The CD stops playing and ejects from the slot.
Push back the bottom of the faceplate with your hand until it
locks.

• Do not attempt to insert a CD into the slot if another one is

already there.

• The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will

get stuck inside and can cause the unit to malfunction.

• When the faceplate has been slid open, it might interfere with

the shift lever or something else. If this happens, pay attention
to safety and move the shift lever or take an appropriate action,
then operate the unit.

• Do not use the unit with the faceplate in the open condition.

Doing so will cause breakdown.

2CAUTION

Playing CDs

CD/External disc control features

— 18 —

English

SCAN

RDM

REP

DISP/

NAME.S

M.RDM

SRC

IN indicator

Disc number

Track time

Track number

Release
button

KDC-MP8017_U.S 00.12.26 0:59 PM Page 18