Kenwood DNX710EX User Manual

Page 87

Text mode
Original mode

English 87

⁄

• When the rear speaker sound is switched, the audio

source that is output at the AV OUTPUT terminal is also
switched to the same source.
However, if you have set the "Area" to "Reverse", the
audio source that is output at the AV OUTPUT terminal is
switched depending on the front sound source.

3 Switches the front and rear audio sources.

(This button appears when the Zone
function is On.)

Use "Reverse" to change over the front and
rear audio sources.

4 Adjusts the volume of the rear channel.

(This button appears when the Zone
function is On.)

5 Returns to the original screen.

⁄

• There are following limitations when zone function is set

to "On".

- There is no output from the subwoofer.
-

(page 85) are not available.