Kenwood DNX710EX - Manual (Page 42)

42 DNX7100
TV Watching
Functions During TV Screen
Basic functions are available even when the TV
screen is displayed.
Display the TV screen
NAV
1 3
5 4
7
6
2
1 TV Band Number Display
2 Memory Number Display
3 Channel Number Display
4 Channel Up Area
Increases the channel.
5 Channel Down Area
Decreases the channel.
6 Band Switch Area
Switches to TV1 or TV2.
7 Information Display Button Area
⁄
• For TV picture selection and receiver button operations,
see (page 12).
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Various control screens appear in the TV Source mode. (You can only operate TV with the optional
accessory TV Tuner connected.)
Functions When Displaying the Easy
Control Panel
Displays a floating control panel in the screen.
NAV
1 2 3 3 4
5
6
1 Switches the source.
2 Switches the TV band (to TV1 or TV2).
3 Selects a channel.
Use the (page 43) to change
the channel tuning sequence.
4 Switches the Seek mode.
(page 43 for the )
5 Displays the Screen Control screen.
(page 57 for the )
6 Displays the external device control screen.
See Control> (page 54).
⁄
• The Easy Control Panel display is hidden when you touch
a central area of the monitor.