Kenwood DNX710EX User Manual
Page 79
English 79
⁄
• When you select the Menu, Easy Control screen, or
Navigation, the display is shown in the full-size display
mode automatically. The screen mode of these displays
cannot be changed.
• The picture qua¡lity can be set for each source.
Full picture mode (FULL)
Zoom picture mode (ZOOM)
Justify picture mode (JUST)
Normal picture mode (NORMAL)
Next page
3
Security Code Setup
You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
1
Display the Security Code Setup screen
Touch [Security] in the SETUP Menu (page 66).
1
2
3
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
(
On)
3 Returns to the original screen.
2
Start Security Code setup
⁄
• If you have already completed the code registration,
CLR
is displayed.