Kenwood DNX710EX - Manual (Page 84)

84 DNX7100
Audio Control
Audio Control Menu
Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the control screen
NAV
Press several times until the control screen
appears.
2 Display the Audio Control menu
3 Select the Audio Control item
1
1 Switches to the selected Audio Control
screen.
Audio Control
You can adjust the front/rear and right/left audio
balance.
1 Display Audio Control
Touch [Audio Control] in the Audio Control
Menu (page 84).
2 Display the Audio Control screen
1 1
2
2
3
5
4
1 Adjusts the right and left volume balance.
2 Adjusts the front and rear volume balance.
3 Turns the Loudness control function On or
Off.
If turned "On", high and low tones are
automatically enhanced during low volume.
4 Displays the present source information.
THe stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
5 Returns to the original screen.