Kenwood KRC-435 - Manual (Page 8)

Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to attach a title to
• A title can't be attached to a MD.
• Disc Naming can't be done during CD text or clock display.
2 Enter name set mode
Press the [NAME] button for at least 2 seconds.
"NAME SET" is displayed.
3 Move the cursor to the enter character position
Press the [
4] or [¢] button.
4 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
5 Repeat steps 3 through 4 and enter the name.
6 Exit name set mode
Press the [NAME] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
Station/Disc Naming (SNPS/DNPS)
Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information Display
Frequency
Station name
"SNPS"
Clock
In Tape source
Information
Play side
Tape running
Clock
In External disc source
Information Display
Track number & Track Time
Disc name
"DNPS"
Disc title "D-TITLE"
Track title "T-TITLE"
Clock
Switching Display
General features
— 8 —
English
KRC435_U.S_r3 01.11.27 7:18 PM Page 8