beautypg.com

Kenwood KRC-435 User Manual

Page 11

background image

Putting the station in the memory.

1

Select the band
Press the [FM] or [AM] button.

2

Select the frequency to put in the memory
Press the [

4] or [¢] button.

3

Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.

Station Preset Memory

Entering the frequency and tuning.

1

Select the band
Press the [FM] or [AM] button.

2

Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.

3

Enter the frequency
Press the number buttons on the remote.
Example:

Desired frequency

Press button

92.1 MHz (FM)

[#0], [#9], [#2], [#1]

810 kHz (AM)

[#0], [#8], [#1], [#0]

Canceling Direct Access Tuning

Press the [DIRECT] button on the remote.

Direct Access Tuning (Function of remote)

Selecting the station.

1

Select tuner source
Press the [SRC] button.
Select the "TUNER" display.

2

Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.

3

Tune up or down band
Press the [

4] or [¢] button.

During reception of stereo stations the "ST" indicator is ON.

Tuning

Choose the tuning mode.

Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.

Tuning mode

Display

Operation

Auto seek

"AUTO 1"

Automatic search for a station.

Preset station

"AUTO 2"

Search in order of the stations

seek

in the Preset memory.

Manual

"MANUAL"

Normal manual tuning control.

Tuning Mode

— 11 —

KRC435_U.S_r3 01.11.27 7:18 PM Page 11