Kenwood KRC-435 User Manual
Page 13
When there's no Cassette Tape inserted
1
Drop open the faceplate
Press the Release button.
2
Insert a Cassette Tape.
3
Press the faceplate on the right side, and return it to its
former position.
• When the faceplate has been dropped open, it might interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an appropriate
action, then operate the unit.
• Do not use the unit with the faceplate in the open condition. If it's
used in the open position dust can enter the inside part and cause
damage.
When there's a Cassette Tape inserted, the "IN" indicator is ON.
When there's a Cassette Tape inserted
Press the [SRC] button.
Select the "TAPE" display.
When you want to listen to the reverse side
Press the [PROG] button.
Eject the Cassette Tape
1
Drop open the faceplate
Press the Release button.
2
Eject the Cassette Tape
Press the [
0] button.
Playing Cassette Tapes
— 13 —
3
Press the faceplate on the right side, and return it to its
former position.
Press the [MTL] button.
Each time the button is pressed the Tape type switches as
shown below.
Tape type
Display
CrO
2
(Type II), FeCr (Type III), Metal (Type IV)
"MTL ON"
Normal (Type I)
"MTL OFF"
Selecting the Tape type
Press the [B NR] button.
Each time the button is pressed the Dolby B NR turns ON or
OFF.
When it's ON, "B-NR" is displayed.
Dolby B NR
Fast Forwarding
Press the [FM] button.
When it's stopped press the [PROG] button.
Rewinding
Press the [AM] button.
When it's stopped press the [PROG] button.
Fast Forwarding and Rewinding
KRC435_U.S_r3 01.11.27 7:18 PM Page 13