Konica Minolta 4139-7733-01A - Manual (Page 53)

Replacing Consumables 47
11
Close the front cover.
12
Carefully close the top cover.
"
When the top cover is
closed, the black toner
cartridge automatically
moves so that it can be
replaced. With each
press of the Rotate Toner
key, the yellow, then
magenta toner cartridge
moves so that it can be
replaced.
13
Press the Cancel key to reset the printer and clear the indicator message.
"
If no operation is performed for 30 seconds after the top cover is
closed, the printer automatically resets.
"
The printer must complete a calibration cycle (less than 2 minutes)
after a toner cartridge has been replaced. If you open a cover
before the printer is reset, the calibration stops, then starts over
again after the cover is closed.