Konica Minolta 4139-7733-01A - Manual (Page 28)

Media Types 22
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m 2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
„ Mixed with any other media in the trays (as this will cause printer misfeed-
ing)
Capacity Tray 1 Up to 50 thick stock sheets, depending on
their thickness
Orientation Face up
Driver
Media Type
Thick stock (91 to 163 g/m 2 )
Weight 91 to 163 g/m² (25 to 43 lb)