Bass centre frequency, Bass level, Bass quality factor – Kenwood KDC-V7090R EN User Manual
Page 14: Bass extend, Middle centre frequency, Middle level, Middle quality factor, Treble centre frequency, Treble level, Audio control features
Adjust the treble level.
Display and setting:
"TRE"/"Treble" : - 8 – + 8
Treble Level
Adjust the centre frequency of the treble.
Display and setting:
"TRE FRQ"/"TRE F" : 10.0 / 12.5 / 15.0 / 17.5 kHz
Treble Centre Frequency
Adjust the middle quality factor.
Display and setting:
"Middle Q" : 1.0 / 2.0
Middle Quality Factor
Adjust the middle level.
Display and setting:
"MID"/"Middle" : - 8 – + 8
Middle Level
Display and setting:
"MID FRQ"/"MID F" : 0.5 / 1.0 / 1.5 / 2.0 kHz
Adjust the centre frequency of the middle.
Middle Centre Frequency
Switch the Bass Extend mode on/off.
Display and setting:
"Bass EXT" : ON / OFF (When the bass extend mode is set to
on, low frequency response is extended by 20%.)
Bass Extend
Adjust the Bass quality factor.
Display and setting:
"Bass Q" : 1.00 / 1.25 / 1.50 / 2.00
Bass Quality Factor
Adjust the bass level.
Display and setting:
"Bass" : - 8 – + 8
Bass Level
Adjust the centre frequency of the bass.
Display and setting:
"Bass FRQ"/"Bass F" : 60 / 70 / 80 / 100 (Only when the bass
quality factor is set to 1.00, 1.25 or 1.50)
/ 150 (Only when the bass quality factor
is set to 2.00) Hz.
Bass Centre Frequency
Audio control features
— 14 —
English