Konica Minolta 125 - Manual (Page 20)

37 36
• If the release button (•) is pressed, the self-timer/remote-control lamp on the
front of the camera will blink once before the picture is taken.
If the delay button (2s) is pressed, the self-timer/remote-control lamp on the
front of the camera will blink for two seconds before the picture is taken.
C 3. Point the remote control toward the front
of the camera and press either the
release button or the delay button (C).
IR REMOTE CONTROL RC-3 ( SOLD SEPARATELY )
1. Place the camera on a tripod, press the
drive-mode button until appears in the
data panel (B).
• If your camera has Panorama function and you will
be taking a panorama photo, be sure to select the
panorama mode before placing on a tripod.
2. Place the focus frame on your subject.
TAKING THE PICTURE
B
Continued on next page.