Konica Minolta 125 - Manual (Page 13)

23 22
Your camera automatically rewinds the film after the
last exposure is taken. When
blinks in the data
panel, open the back cover and remove the film.
• Do not open the back cover until
blinks in the data
panel. Never use force.
If rewind stops before the film has been completely rewound, all the indicators
will blink. Insert a fresh battery, then press the manual-rewind button.
Once the film is loaded, the back cover will lock until
the film rewinding is complete, to prevent the back
cover from being opened accidentally. If the back
cover release lever is slid to the open position,
“CLOSEd” will appear in the data panel.
REWINDING THE FILM
MANUAL REWIND
To begin rewind before the end of the roll,
turn the camera on and press the manual-
rewind button using the smaller button key
on the strap.