Kenwood DNX6980 User Manual

Page 87

Return to the Top page

Audio Setting Up

Controlling equalizer manually

This setting cannot be performed when you

select [iPod] in the Equalizer screen.

Touch [EQ] in the Equalizer screen.

Touch the screen and set the Graphic

Equalizer as desired.

Gain level (light green boxed area)
Adjust the gain level by touching the each
frequency bar.
Touching [

2], [3], [5] and [∞] can also

adjust the level. Use [

2] and [3] to select a

frequency, and [

5] and [∞] to set the level.

EQ INIT
Returns to the previous level which the gain
level is adjusted.
Flat
Tone curve becomes flat.
Bass EXT (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5 Hz.
SW Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See

Speaker setup (P.81)

operation

Controlling EQ curves

Select EQ curve from [Natural],

[Rock], [Pops], [Easy], [Top40], [Jazz],
and [User] using [

2] and [3].

Controlling SystemQ-Ex

Selects items to be adjusted for tone curve

setup. If you turn off this setting, only Level

can be set up for tone curves.

Touch [ON] or [OFF] of [SystemQ-Ex].