Kenwood DNX6980 - Manual (Page 12)

11
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.97) .
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “American English (en)”.
1
Touch [SET].
2 Touch [ 2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup (P.72) .
Angle
Adjust the position of the monitor. Default is “0”.
1
Touch [SET].
2 Touch desired angle number and [ ].
For detailed operation, see Monitor angle control (P.74) .
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is “iPod”.
1
Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1
Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [ ].
For detailed operation, see Panel color coordinate (P.75) .
EXT SW
Control the external devices.
1
Touch [SET].
2 Set device name, output pattern, and pulse set for each device. Then, touch [ ].
For detailed operation, see EXT SW setup (P.73) .
Camera
Set the parameters for the camera.
1
Touch [SET].
2 Set each item and touch [ ].
For detailed operation, see Camera Setup (P.78) .
1
Continued