Kenwood KRF-V6020 - Manual (Page 21)

21
Operations
KRF-V7020/V6020/V5020 (En/T)
3
Choose an RDS preset station that displays both the "RDS" and
"EON" indicators.
Tune to a preset RDS station.
Be sure " EON " appears in the display
Display When " TA " is selected
• If you want to reserve TA , receive a station with which the TP indicator
lights.
• When “ EON ” does not light although an RDS station is received, that
station is not transmitting EON data. Please select a different station.
2
Press the TA/NEWS key to select the information type
of your choice.
Display When " TA " is selected
" TP " lights for stations where TP (Traffic Program) information
can be received.
Each press switches the reservation mode as follows:
1 TA (Traffic Announcement)
2 NEWS (News)
3 TA, NEWS (Traffic Announcement and News)
4 off (EON off)
• If “ TA ” and “ NEWS ” can not be selected, carry out the RDS
automatic memory function again. *
4
Wait for the information you selected while listening to the
current station.
When listening to the tuner:
Be sure to stay tuned to stations that display both the “ EON ” and
“ RDS ” indicators.
To listen sources other than the tuner:
1 Tune in a station which that displays both the “ EON ” and “ RDS ”
indicators, then use the INPUT SELECTOR to switch the input to
the source you desire.
2 Even when the INPUT SELECTOR is set to a source other than
tuner, it will automatically switch to tuner when the desired EON
program starts to broadcast. During this period, the source selected
in step 1 continues playing, but will not be heard.
3 When reception of the desired EON program is complete, the
INPUT SELECTOR returns to the previous input source.
• When the power is OFF, the EON function does not operate.
• If a reserved EON program starts to broadcast during analog record-
ing, the INPUT SELECTOR switches to the tuner and the station
broadcasting the EON program is recorded.
TP (Traffic Program) indication
When the “ TP ” indicator is lit, this means that the presently-received
station or a station in the same network is transmitting traffic informa-
tion. When “
TP ” is displayed for the station being received, the traffic
information of this station can be received without EON reservation.
When waiting for information while listening to a RDS
station without the EON function
If the “ EON ” indicator does not light in steps 3 and 4 and the desired
kind of information has already been selected, the information from
only the station being received will be waited for.
The receiver will wait for the desired information to start as long as the
tuner is set to a preset
RDS station that displays both the " EON " and
" RDS " indicators, and the power is turned ON.
1
Complete steps 1~3 of "Presetting RDS stations (RDS
AUTO MEMORY)".
*
Skip this step if you have already completed the RDS AUTO
MEMORY procedure.
• The EON function will not work if all 30 FM preset stations were stored
manually using the procedure shown in “Presetting radio stations
manually”. Be sure to use the
RDS automatic memory function.
To cancel EON reservation
Turn the “TA” and “NEWS” indicators off.
BBC 1 FM FM
AM
kHz
MHz STEREO
DSP
S.DIRECT
A SP
MUTE MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R L DIGITAL B TI.VOL
RDS EON PTY
TP TA NEWS
BBC 2 FM FM
AM
kHz
MHz STEREO
DSP
S.DIRECT
A SP
MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R L DIGITAL B TI.VOL
RDS EON PTY
TP TA NEWS
1 Hold down the TA/NEWS key for more than two seconds so that
the “TI.VOL” indicator starts blinking.
2 Use the VOLUME CONTROL knob to select the desired volume
level.
Proceed to next step within five seconds.
3 Press the TA/NEWS key to enter the new setting.
• The “ TI.VOL ” indicator stops blinking and remains lit.
Setting the volume while receiving information (TI volume)
If you preset the volume level, you can listen to the information of your
choice at that volume level automatically. After the information has
been received, the volume returns to the previous level.
TI -5 dB ) FM
AM
kHz
MHz STEREO
DSP
S.DIRECT
A SP
MUTE MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R L DIGITAL B TI.VOL
RDS EON PTY
TP TA NEWS
Canceling TI volume
Hold down the TA/NEWS key for more than two seconds so that
the “TI.VOL” indicator goes off.
Listening to radio broadcasts
Blinks