Kenwood DPX313 - Manual (Page 7)

English | 7
Category Item Setting Entry Setting overview Condition Page
“Russian”* 3 “OFF”/ “ON”* Selects Russian as the display language. 28
“Scroll” “Auto”/ “Manual”* When set to “Auto”, scrolls the screen once with the change
of the displayed text. —
“Built in AUX” “OFF”/ “ON”* Sets whether to display AUX during source selection.
“Power OFF” “-----”/ “20min”*/
“40min”/ “60min” Turns off the power when the preset time has lapsed in the
Standby mode. 28
“CD Read” “1”*/ “2” Sets the CD read mode. 28
“Audio Preset” * 2 1 sec. Presets the setting value of the audio control. The preset
value is retained after resetting. 24
“DISP REVERSE” “POSI 1”/ “POSI 2”/
“NEGA 1”*/ “NEGA 2” Switches the panel display between positive or negative. —
“CONTRAST” “1” – “10” Adjusting the display contrast. —
“OPENING MSGE
Edit” 1 sec. Sets the opening message displayed when the power is
turned on. 12
“DEMO Mode” “OFF”/ “ON”* 2 sec. Specifies whether to enable demonstration. — 18
SOUND* 1 “S-SET” “CABIN” “Compact1” etc. Selects the car type to compensate the distance difference
between each speaker. 19
/28
“DTA” Makes fine adjustment of the compensation value specified
at Cabin. 19/29
“XOVER” Makes fine adjustment of the X’Over value specified at
Speaker. 20
“S-CTRL” “EQ” Sets the sound quality. 20
“POSIT” Compensates the sound environment in accordance with
the listening position. 20
/21
“LOUD” “OFF”*/ “ON” Compensates high and low pitch sound at lower volume.
“PRESET” Presets the setting value of the audio control. The preset
value is retained after resetting. 21
DISP “TYPE” A/ B/ C/ D Sets the display pattern. — 9
“GRAPH” Spectrum Analyzer 1 – 2 Sets the Type D spectrum analyzer display. Î
“SIDE” Text icon/ Source
icon/ OFF Sets the Type A/B side icon display. Åı
“TEXT” Sets the text display. ÅıÇ 9
“OUT” Sets the vehicle-side display. —
Color* 1 Sets the Panel illumination color. 10
P.MEM Presets a station. 15
SCAN “ON”/ — When set to “ON”, plays the intro of the music in the folder
successively.
RDM “ON”/ — When set to “ON”, plays the music in the folder randomly.
FiREP “ON”/ — When set to “ON”, plays the music repeatedly.
FoREP “ON”/ — When set to “ON”, plays the music in the folder repeatedly.
SCAN “ON”/ — When set to “ON”, plays the intro of the music on the disc
successively.
RDM “ON”/ — When set to “ON”, plays the music on the disc randomly.
M.RDM “ON”/ — When set to “ON”, plays the music in the disc changer
randomly.
T.REP “ON”/ — When set to “ON”, plays the music repeatedly.
D.REP “ON”/ — When set to “ON”, plays the music on the disc repeatedly.
Next page 3
*Factory setting
*1 Function of DPX503U.
*2 Function of DPX303/DPX313.
*3 Function of Russian sales model.