Basic operation – Kenwood DPX313 User Manual
Page 4
4
|
DPX503U/DPX303/DPX313
General functions
Power/Source Select button : [SRC]
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then
turn the Control knob or push it toward left or right.
To determine the selected source, press the Control
knob.
SRC Select mode 2: Pressing this button each time
switches between sources.
Tuner (“TUNER”), USB or iPod (“USB” or “iPod”)
(DPX503U only), CD (“Compact Disc”), Auxiliary input
(“AUX”), and Standby (“STANDBY”)
Press at least 1 second to turn off the power.
⁄
• The SRC Select mode can be set in “MENU”
>
“SRC Select” of
• When an optional accessory is connected, the source name
for each device appears.
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle's battery. The time until full power OFF can be set in
“Power OFF” of
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”. (DPX503U only)
Volume control : [AUD]
Turn the knob to adjust the volume.
Attenuator : [ATT]
Turning the volume down quickly.
When the volume is reduced, the “ATT” indicator
flashes.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
31).
Auxiliary input : Auxiliary input
Connect a portable audio device with mini-plug
cable (ø3.5 mm).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The auxiliary input requires the setting made in “MENU”
>
“Built in AUX” of
Subwoofer output : Control knob
Switches between ON (“SUBWOOFER ON”) and OFF
(“SUBWOOFER OFF”) each time pushing toward down
for at least 2 seconds.
⁄
• This function requires the setting made in “MENU”
>
“SWPRE” of
Function Control : [FNC]
Pressing this button allows you to set various
functions using the Control knob. Refer to
Category
Function of setup item
MENU
Allows you to set up the environment.
SOUND*
Allows you to set up the sound environment.
DISP
Allows you to set up the display.
COLOR*
Allows you to set up the illumination color.
*Function of DPX503U
Text/Title scroll : Control knob
Scrolls the CD, audio file, and Radio text display when
pushing toward up for at least 2 seconds.
Basic Operation
[AUD]
[1]—[6]
[ATT]
[TI]
[FNC]
[
]
[SRC]
Auxiliary input
Disc slot
Control knob
USB Terminal
(DPX503U only)