Kenwood DPX313 - Manual (Page 19)

English | 19
Function of DPX503U
Cabin selection
You can compensate the delay of the sound arrival
time, which is caused by the installation position of
the speakers, by selecting your environment from
the following car types;
Car type (rear speaker position) Display
Not compensating. “OFF”
Compact car (rear door) “Compact1”
Compact car (cargo) “Compact2”
Sedan (rear door) “Sedan1”
Sedan (cargo) “Sedan2”
Station wagon (rear door) “Wagon1”
Station wagon (cargo) “Wagon2”
Minivan (rear door) “Minivan1”
Minivan (cargo) “Minivan2”
Sport-utility vehicle (rear door) “SUV1”
Sport-utility vehicle (cargo) “SUV2”
Passenger van (rear door) “PassengerVan1”
Passenger van (cargo) “PassengerVan2”
Calls the value adjusted at (page 19). “User”
1 Enter Cabin select mode
Select “SOUND” > “S-SET” > “CABIN”.
For how to select Function Control item, refer to
(page 6).
2 Select the car type
Turn the Control knob and push the center
when the desired item is displayed.
3 Exit Cabin select mode
Press the [FNC] button.
⁄
• You can compensate the distances in more details by
using (page 19) function.
In addition, the value specified at can be called
by selecting “User”.
Audio Adjustments
Function of DPX503U
DTA (Digital Time Alignment) setting
Adjusting fine tuning of the speaker position
compensation value specified at
(page 19).
1 Enter DTA setting mode
Select “SOUND” > “S-SET” > “DTA”.
For how to select Function Control item, refer to
(page 6).
2 Select the speaker you want to set
Setting speaker Display
Front speaker “DTA-Front”
Rear speaker “DTA-Rear"
Subwoofer “DTA-Sub"
Turn the Control knob and push the center
when the desired item is displayed.
3 Set the compensation value of the speaker
position
Turn the Control knob.
Adjust between 0 and 440 cm.
Refer to (page 29) on how to set the
compensation value.
4 Exit DTA setting mode
Press the [FNC] button.