Konica Minolta Printer Copier - Manual (Page 73)

Making Copies 5
Konica 7115/7118 5-11
5.4 Specifying the Zoom Ratio
By specifying a zoom ratio, the copy can be enlarged or reduced.
Types of Zoom Ratio Setting Description
AMS This setting automatically selects the most appropriate zoom ratio based on the
size of the original loaded and the paper size selected for use. The copier must
be equipped with an Automatic Document Feeder.
Fixed ratios The following optimum zoom ratios are available for making copies from
commonly used original sizes to standard paper sizes.
• 50%
• 64% (11Ч17
Ц 8.5Ч11)
• 77% (11Ч17 Ц 8.5Ч14)
• 129% (8.5Ч11 Ц 11Ч17)
• 155% (5.5Ч8.5 Ц 8.5Ч14)
• 200%
Ratios set using Zoom ([ ][ ])
key
Touching the [ ] or [ ] key increases or decreases the zoom ratio in 1%
increments. The ratio can range from 50% to 200%.
Full Size This setting makes a copy the same size as the original (100%).
X/Y Zoom This setting allows the zoom ratio to be set independently for X (horizontal) and Y
(vertical) directions.
The ratios can be set directly on the KEYPAD, in the range between 50% and
100%.
Konica7115_7118.book Page 11 Friday, October 19, 2001 12:02 PM