Konica Minolta Printer Copier - Manual (Page 109)

Using the Utility Mode 7
Konica 7115/7118 7-13
7.3 Toner Replenisher (Auxiliary Toner Replenishing)
The copier tends to exhaust the supply of toner rapidly when making a number of copies from
an original with dark solid areas, such as a photo. As a result, the image density of the copy
will become lighter. In such a case, you can use Toner Replenisher to quickly restore the
normal image density.
✎
Note
Do not turn the Power Switch OFF or open the Front Cover while the copier is replenishing
toner.
Toner will not be replenished if the image density is sufficiently high.
The toner replenisher sequence ends automatically.
Running the Toner Replenisher Sequence
1 Call the Utility Mode to the Display.
❍ Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the Display, enter “3”
on the KEYPAD.
3 Press the [START] key.
Konica7115_7118.book Page 13 Friday, October 19, 2001 12:02 PM