Kodak I1400 - Manual (Page 128)

A-61550 May 2007 123
Replacing the ink
blotter strips
The two ink blotter strips in the scanner transport area collect ink
overflow. To order additional ink blotter strips, see the section entitled,
“Supplies” later in this guide.
1. Lift up the scanner cover release to unlatch the scanner cover.
2. Pull up to open the scanner cover.
3. Locate the two blotter strip channels. These channels are where the
blotter strips will be installed or replaced.
4. If you are replacing a blotter strip, proceed with Step 5, if not, go to
Step 6.
5. Grasp the blotter strip, carefully pull it off of the channel and discard
the soiled strip.
6. Remove the backing from a new blotter strip.
Blotter
strip
channels