Activating your sirius subscription, Basic operation, Installing batteries in the remote – Kenwood H2EC User Manual
Page 7
13
6. Your unit’s unique 12-digit SIRIUS ID Number will
be displayed (below). Write the number down,
and have your credit card handy.
7. You can also call SIRIUS toll-free at 1-888-539-
SIRIUS (7474), and the operator will instruct
you. (You can also contact SIRIUS on the
Internet at: www.siriusradio.com and click on
the “Activate” link.)
8. Once your subscription has been activated,
the display will read “Subscription Updated”
for a few seconds. Press any button. The
Here
2
Everywhere will return to the Default
display screen. At this point, try turning the
Control Knob. You should have access to many
channels now.
Default Screen
Removing Here2Everywhere
From the Car Docking Cradle
When docked in the Car Docking Cradle,
Here
2
Everywhere has a secure locking mechanism
to hold it in place while the vehicle is in motion.
To remove Here
2
Everywhere from the Car Docking
Cradle, press the small button on the back of the
unit and gently slide Here
2
Everywhere out.
Basic Operation
After you have activated your SIRIUS subscription, the
Default Display screen will appear. The Default Display
screen has two font sizes: medium and large. You can
change font sizes by pressing the Display button.
On the screen, you’ll see the current SIRIUS channel
number (001), the channel name, the artist and
song title, the category, the time, the preset bank
12
Installing Batteries
in the Remote
Note: Do not expose the remote control to high
temperatures or direct sunlight. This could damage
or deform the case and result in battery leakage
or other harm.
1. Remove the battery cover as shown.
2. Install two AAA batteries as shown.
3. Replace the battery cover.
Activating Your SIRIUS
Subscription
Before you can listen to Here
2
Everywhere, you must
subscribe to SIRIUS Satellite Radio’s service.
Follow these steps to activate your service:
1. Make sure that Here
2
Everywhere is properly
connected.
2. Place Here
2
Everywhere in the Docking Station by
sliding the unit all the way into the cradle so that
the connector at the bottom of the unit makes
proper contact in the cradle.
3. Press the power button to turn Here
2
Everywhere
on. After displaying the SIRIUS logo, the display
will read “Acquiring Signal.” Once the SIRIUS
satellite signal is received, the display will
change to “Call 888-539-SIRIUS to Subscribe.”
Note: If the display reads, “Updating Channels,” the
receiver is getting the latest channel listing from the
SIRIUS satellites. Give it 5 minutes to complete
before moving to the next step.
4. If your Here
2
Everywhere has been properly con-
nected and the antenna is receiving the SIRIUS
signal (Preview Channel #184), you will hear
audio. If you do not hear audio, re-orient the
antenna until you do. (See Antenna Aiming, on
pg. 23 to use the ANTENNA SIGNAL screen.)
• Channel #184 is the SIRIUS Preview Channel.
You will not be able to tune to any other channels
until you activate your SIRIUS subscription.
Note: If you’ve previously activated your subscrip-
tion and then deactivated it, the Preview Channel
will be mute. You will still see the message, “Call
888-539-SIRIUS to Subscribe.”
5. Press the menu button on Here
2
Everywhere to
enter the Menu Options. Make sure the first item,
“SIRIUS ID,” is highlighted, then press the Control
Knob (or the remote Select button).
Channel
number
Signal
strength
indicator
Category
name
Clock
Channel
name
Artist and
song title
Preset bank
indicator
(A-E)
KEN.4064 H2EReceiver/Car Man 11/19/04 9:44 AM Page 12