Kenwood R-K701 - Manual (Page 11)

11 EN
ENGLISH
9
MODE key
Used for switching the function of the 4 / ¢ keys
to function menu mode. Press again to reset the func-
tion of the
4 / ¢ keys to normal mode.
Items of function menu mode :
INPUT LEVEL ¤
BALANCE ^
AUTO MEMORY §
DIMMER SET w
LEVEL METER e
A.P.S. SET e
TIME ADJUST $
TIMER SET °
SOUND PRESET ¡
ROOM EQ &
• Some of the items may not be displayed depending on
selected input source.
0
MUTE key ^
Used for muting the sound temporarily.
!
VOLUME knob ^
Used for volume adjustment.
@ 4 / ¢ (multi control) keys
In the normal mode, these are used for
– skip CD tracks
£
– select a preset radio station §
In the function menu mode (selected by pressing the
MODE key), press these keys to select the desired
menu item. To set or enter setting of the function
menu item, press the ENTER key.
MODE ENTER
• The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
#
Basic operation keys
CD 6 key ™
Used for selecting the CD input and starting playback.
During CD playback, press to pause.
TUNER/BAND key ∞
Used for selecting the TUNER input.
This key is also used to select the received broadcast
band.
INPUT SELECTOR key %¤
Used for selecting an input source (PHONO, TAPE,
AUX).
7 (STOP)/TUNING MODE key
CD : £
Used for stopping a disc operation.
TUNER : ¶
Used for switching between the AUTO (auto
tuning, stereo reception) and MONO (manual
tuning, monaural reception) modes.
Standby mode: $
Used for displaying the clock.
$
DISPLAY key (for CD/TUNER inputs only) ¢
Used for changing the CD-TEXT displays.
Used for displaying the day of week and the time.
%
SOUND CONTROL knob (
Used for adjusting the SOUND level.
^
TIMER key q
Used for activating or deactivate timer function.
&
PHONES jack ^
Connect headphones with a stereo mini-plug
(optionally available) to it.
* REMOTE sensor #
This sensor receives signals from the remote control
unit.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the unit to back up the memory.
This is called Standby mode. Under the condition, the unit can be turned ON by the remote control unit.
Controls and indicators
04.12.15, 23:46 11