Using color connector, System requirements, Macintosh systems – Kodak Printer User Manual
Page 4: Windows systems, Using color, Connector, Refer to using color connector
CONTENTS
INDEX
SEARCH
HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Network
Interface Guide
Using Color Connector
This section describes how to use the Kodak Professional Colorflow ICC
color connector (color connector) as an assembly tool to create color
connector files.
System Requirements
Listed below are the hardware and software necessary to run color
connector.
Macintosh Systems
•
60 MHz PowerPC or higher processor with a minimum of 16 MB of
memory. (A 150 MHz PowerPC 604e processor with 32 MB of memory
is recommended.)
•
Macintosh operating system 7.6.1 or higher operating system.
(Macintosh operating system 8.0 is recommended.)
•
a monitor with a minimum spatial resolution of 640 x 480 pixels.
•
a video system with a minimum resolution of 256 colors.
Windows Systems
•
60 MHz Pentium processor with a minimum of 16 MB of memory. (A 100
MHz Pentium processor with 32 MB of memory is recommended.)
•
Windows 95, Windows NT 4.0 Workstation, or Windows NT 4.0 Server.