Konica Minolta IP-411 - Manual (Page 12)

The Print Controller 1-3
The Print Controller
System Configuration
The Konica IP-411 Print Controller is an embedded control board for the Konica 7040/7033 Copier engine
and is based on an IBM compatible PC architecture that includes the following:
Intel Pentium 233 MMX CPU
PCI bus interface to 7040/7033 Copier engine
PCI bus interface to optional network board (KN-302)
Standard 32 MB 168 pin DIMM memory
IDE 8 MB Flash (standard)
IDE Hard Drive (optional HD-104)
The IP-411 embedded control board contains custom hardware and software for communicating with and
controlling the print engine. The IP-411 embedded control board can be reprogrammed in the field via the
Parallel Port or through the network.
Settings
Default Settings
Default Paper Size Letter
Default Resolution 400 dpi
Default Emulation PCL 5E
Default Printer Quality Text Mode
Other Settings
E-RDH Print Order Normal
Duplex Off
Sheet Insertion Off
Paper Thickness Normal
Print Density Engine default
Finisher Mode Job Offset