Kompernass KH 6508 User Manual

Page 17

Silvercrest KH 6508/KH 6509



Setting the screen format

Press the “OK” button once. The available options for the

sub-item “TV Shape” will then be displayed:

4:3 Letter Box

Screen format 4:3 “Letterbox“: The top and bottom pic-
ture edges have a black bar when ﬁ lms in the 16:9 format
are shown.

4:3 Pan Scan

Screen format 4:3 “Pan & Scan“: To make the best pos-
sible use of the screen’s height the right and left picture
edges are clipped oﬀ when ﬁ lms in the 16:9 format are
shown.

16:9

Widescreen format 16:9: Films in the 16:9 format are
shown in their full size with 16:9 (1.78:1) widescreen tel-
evisions without any black bars at the top and bottom
edges of the picture and without clipping the left and
right picture edges.

Select the required screen format with the control buttons

and conﬁ rm by pressing the “OK” button once.

Please note:

The correct setting depends on the television with
which the DVD Player is to be connected. If you are not
sure which screen format your television can present,
then please refer to the operating instructions for the
given television.

Setting the television standard

Press the control button once to select the menu sub-

item “TV System”.

Press the “OK” button once. The available operations for

the sub-item “TV System” will then be displayed:

Auto

The standard in which the DVD/VCD/S-VCD was recorded
is automatically selected in this setting. Only set “Auto”
if the DVD Player is connected to a multi-standard
television!

PAL

DVDs/VCDs/S-VCDs recorded in the PAL standard are
played in this setting. DVDs/VCDs/S-VCDs recorded in
NTSC standard are automatically converted so that they
can be played in the PAL format. Set “PAL” if the DVD Player
is connected to a PAL television.

NTSC

DVDs/VCDs/S-VCDs recorded in the NTSC standard are
played in this setting. DVDs/VCDs/S-VCDs recorded in the
PAL standard are automatically converted so that they
can be played in the NTSC format. Set “NTSC” if the DVD
Player is connected to an NTSC television.

Select the appropriate television standard with the con-

trol buttons and conﬁ rm by pressing the “OK” button
once.

Please note:

The correct setting depends upon the television with
which the DVD Player is to be connected. Most tel-
evisions will conform with the television standard in
your country except if the television was purchased
abroad.

If you are not sure which is the customary television
standard in your country, then refer to the operating
instructions for the given television, or turn to the
Glossary in the instructions to ﬁ nd the explanation
under the headword “Television Standard”.

➧

For this subject please refer to Chapter 17. “Glossary/In-
dex”.

Setting Video Output

Press the control button once to select the menu sub-

item “Video Output”

Conform by pressing the “OK” button once. The available

options for the sub-item “Video Output” will now be dis-
played:

RGB

Setting to connect the DVD Player to an RGB-capable
television with a 21-pin SCART cable

S-Video

Setting to connect the DVD-Player via S-Video

YUV

Setting to connect the DVD-Player via component
signal

YPbPr

Setting to connect the DVD-Player via component signal
YPbPr (Progressive Scan)