Getting started – Kenwood DNX9980HD User Manual
Page 6
6 | Quick Start Guide
Getting Started
Initial Setup
This setting is only necessary when you use
the unit for the first time after purchase,
and when you reset the unit.
1
Turns the power On.
2
Touch the corresponding key and set the
value.
[Language] Select the language used for
the control screen and setting items.
[Angle] You can adjust the position of the
monitor.
[iPod AV Interface Use] You can
determine the use of iPod/AV-IN3 input
terminal. (Preset: “iPod”)
“iPod”: Select when connecting the
iPod using the KCA-iP302 for iPod.
“AV-IN3”: Select to play an AV
component connected to the iPod/
AV-IN3 input terminal.
[Color] Sets the button illumination color.
[EXT SW] Set the controls for the external
devices.
[Camera] Set the parameters for the
Camera.
3
Touch [Finish].
Language Setting
ASR
Selects whether to use the voice control function. (Preset: “Enabled”)
Touching [Disabled] allows you to select languages for respective items.
“Enabled”: Voice control is activated.
“Disabled”: Voice control is deactivated.
Language Select
Selects a language.
Enter
Determines the selected language.
Cancel
Cancels the selected language.
When [ASR] is set to “Disabled”
GUI Language Select
Selects the display language used for the control screen and so forth.
Navigation Language Select Selects the language used for navigation.
Text Language Select
Selects the language used for tag text (song information).
Monitor Angle Control
-1 – 5
Sets the Monitor angle.
Off Position
Stores the current monitor angle as the angle during power off.
Returns to the previous screen.