Kenwood DNX9980HD - Manual (Page 10)

10 | Quick Start Guide
HD Radio™ Listening
Selecting a HD Radio source
1
Press [SRC] to display the Source Control
screen. When a video screen is displayed,
press [SRC].
2 Touch [Menu] on Source Control screen.
3 Touch [ HD RADIO].
Control the station you are listening
to on the source control screen
Button General operation
HD FM Switches to the HD FM1/2/3 band.
HD AM Switches to the HD AM band.
4 / ¢ Tunes in a station.
CH
∞ / CH5 Selects a channel (program).
TI Turns the Traffic Information function On
or Off.
Opens the multi function bar
Multi Function
#/# ∞ Switches the multi function display.
P1 – P6 To recall the memorized station.
SEEK Switches the Seek mode.
AME Selects the Auto Memory mode.
RCV Switches the Receive mode.
PTY Searches station by program type.
INFO Displays HD Radio Information screen.
CH-List Display the Channel List Screen.
Closes the multi function bar.
Station Preset Memory
1
Touch [ 4]/ [¢] to select the station
you want to store in memory.
2 Touch [ ] to open the multi function
bar.
3 Touch [P1] – [P6] for at least 2 seconds.
Auto Memory
1
Touch [FM]/ [AM] to select the band.
2 Touch [ ] to open the multi function
bar.
3 Touch [AME].
4 Touch [ 4]/ [¢] to start Auto Memory.
Auto Memory terminates when 6 stations
are stored or when all stations are tuned in.
Recalling the stations in the memory
1
Touch [ ] to open the multi function
bar.
2 Touch [P1] – [P6].
This HD Radio receiver enables: