How to play media – Kenwood DNX9980HD User Manual
Page 11
English | 11
How To Play Media
Disc media
0
1 sec.
Press [
0] for 1 second to open/close the
front panel.
If a disc is already inserted, it is ejected by
press [
0] for 1 second.
Notes
• Playable discs: DVD-Video, DVD±R/RW,
DVD±DL, CD, CD-ROM/R/RW, Video CD
• Playable disc file format: ISO 9660 Level 1/2,
Joliet, Romeo, Long file name
• Playable Audio files: AAC-LC (.m4a), MP3
(.mp3), WMA (.wma)
• Acceptable Video files: MPEG1 (.mpg, .mpeg,
.m1v), MPEG2 (.mpg, .mpeg, .m2v), DivX (.divx,
.div, .avi)
USB device
To disconnect the USB device, touch [
0]
on the source control screen, and then
disconnect the USB device.
Notes
• Acceptable media: mass-storage-class USB
device
• Playable USB device file system: FAT16, FAT32
• Playable Audio files: AAC-LC (.m4a), MP3
(.mp3), WMA (.wma), Linear PCM (WAVE) (.wav)
• Acceptable Video files: MPEG1 (.mpg, .mpeg,
.m1v), MPEG2 (.mpg, .mpeg, .m2v), H.264/MPEG-
4 AVC (.mp4, .m4v), WMV 9 (.wmv, .m2ts)
iPod
To disconnect the iPod, stop the playback
by touching [
0] on the source control
screen, and then disconnect the iPod.
Notes
• When Connecting Two iPods: When iPod1 is
disconnected, you cannot listen to the iPod2’s
music. Connect iPod2 to the iPod1 terminal.
SD card
This SD card slot is used to upgrade the
Navigation System.
For how to upgrade the Navigation
System, refer to the instruction manual of
the navigation system.
0
3 sec.
Press [
0] for longer than 3 seconds to
open the front panel.
Inserting the SD card
Hold the SD card with the label side up
and the notched section on the right,
and insert it into the slot until it clicks.
Removing the SD card
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
Press [
0] for longer than 1 second to close
the front panel.