beautypg.com

Switching modes, Volume, Attenuator – Kenwood KDC-7080R User Manual

Page 8: Loudness, Audio control setting, General features, English

background image

Adjust various parameters of sound quality.

Audio Control Setting

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.

Turning Loudness On/Off:

Hold down the LOUD button for one second or more to switch
the loudness on and off.

Loudness

This function allows you to turn down the volume quickly.

Turning Attenuator On/Off:

Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.

Turning the volume up, or turning it all the way down deactivates
the attenuator function.

NOTE

Attenuator

Increasing Volume:

Press the u button to turn up the volume.

Decreasing Volume:

Press the d button to turn down the volume.

Volume

Switching Modes:

Each time you press the SRC button, the mode switches as
follows:

Selecting the standby mode:

Press the SRC button repeatedly to select to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is turned on.
The standby mode turns all functions off although leaving the
unit’s power on. Use this mode when you want to have the
display illuminated but do not want to listen to anything.

• The mode switches to the next mode from any mode which

cannot be used.

• The external disc control mode will differ depending on the unit

that is connected.

• The AUX mode is available only when the changer / AUX

switching adapter (KCA-S210A or CA-C1AX) or CD changer
(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected to this unit.
During the AUX mode, "AUX" / AUX-name will show in the
display. When the CA-C1AX is being used, the AUX Mode will
replace the External Disc Control Mode.

Presetting AUX-name
(Only when the KCA-S210A is connected)

In the AUX mode, press the NAME.S button for two seconds or
more. "NAME SET" is display and AUX-name mode is entered.
Input the characters, referring to the section on "Presetting Disc
Names (DNPS)" (page24).

NOTE

NOTE

Tuner mode

CD mode

External disc control mode 1

External disc control mode 2/AUX mode

Standby mode

Switching Modes

General features

— 8 —

English

This manual is related to the following products: