Kenwood KDC-7080R - Manual (Page 23)

Successively play the beginning of each disc on a changer
until you find the one that you want to listen to.
Starting the disc scan:
Press the D.SCN button. "D-Scan ON" is displayed and the first
10 seconds of each disc are played, in the order in which they
are loaded on the changer.
The disc number currently being heard blinks in the display.
Stopping to Listen to the Disc Being Scanned:
Press the 38 or D.SCN button again to stop the scan and keep
on listening to the disc normally.
• The disc scan function is cancelled when you eject the disc.
• The disc scan function only scans each disc on the changer
once.
• "LOAD" is displayed when discs are being exchanged on the
disc changer.
NOTE
Disc Scan ( Function of disc changers)
Stopping to Listen to the Track Being Scanned:
Press the 38 or SCAN button again to stop the scan and keep
on listening to a track normally.
• The track scan function is cancelled when you eject the disc.
• The track scan function only scans each track on a disc once.
NOTE
— 23 —
Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows.
• You can give names to discs through the presetting disc name
function (see p24).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "NO TEXT" is
displayed for CD and "NO TITLE/NO NAME" is displayed for
MD.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
NOTE
Track time
Disc name (DNPS)
Disc title (Units featuring CD text/MD only)
Track title (Units featuring CD text/MD only)
Switching Display for Discs