Kathrein UFS 790sw - Manual (Page 58)

58
BOX SETTINGS
VIDEO AND AUDIO SETTINGS
Also note the bars at the bottom
of the on-screen display! These
provide information on what to
do next.
Use the buttons to select the line you want to change. Use the buttons to make the
changes.
Screen Format:
Select your TV's format here. Either 4:3 or 16:9/wide screen TV
Picture Scaling:
Select here how the picture from the channel provides is to be adjusted by the receiver if it does not
match your setting (4:3 or 16:9).
For screen format 4:3: Either Letterbox 14:9, Letterbox 16:9 or Pan & Scan/CCO
For screen format 16:9: Always 16:9 or Automatic
HDMI Output:
If you receiver is connected to an HDTV using an HDMI cable, press the button to make the settings.
The following settings are then available (make the selection using the button and the settings
using the buttons):
- Transmission standard: “HDMI” or “Off”
- Image resolution: 576i, 576p, 720p and 1080i
- Test of coloured bars: Press the button to perform a test of coloured bars (only output
over HDMI)
- HDMI audio: “On” (digital audio is transmitted over HDMI) or “Off” (digital audio
is not transmitted over HDMI)
- Digital volume control: “On” or “Off”
Press the button to exit the “HDMI Output” sub-menu.