Kathrein UFS 790sw - Manual (Page 15)

15
If you do not know the
settings or components
used in your reception
system, ask a specialist
engineer!
FIRST INSTALLATION (DISEQC™1.0)
DISEQC 1.0
Press the buttons to switch to “DiSEqC sequence”. Select how often the DiSEqC TM command is
to be sent using the buttons.
Changes to the positions A - D:
Press the buttons to switch to “Position A”. Press the button to open the sub-menu. You
can select a satellite and make the related settings here. Press the
!
(green) button. If you change
the default setting (in this example “ASTRA 19.2°E”), a prompt “Save LNB settings?” will be displayed.
Select “Yes” or “No” using the buttons and confi rm your selection using the button.
Repeat the process as necessary for the other positions (B, C, D),
Press the
!
(green) button to open the next menu:
Continue the fi rst installation with the “Search” section.