Kathrein UFS 790sw - Manual (Page 14)

14
Select the required setting for your LNB control using the buttons (only on connection of the receiver
to a satellite reception system). The following options are available:
- DiSEqC™1.0
- One cable (automatic or manual setting)
- No LNB power (if your LNB has a dedicated power supply)
- No
DiSEqC™
- Toneburst
Continue the fi rst installation with the related section.
FIRST INSTALLATION
You can change between the operation modes using the buttons. Make the “Yes” or “No” settings
using the buttons. Press the
!
(green) button to open the next menu:
Note:
If the receiver is already connected
to a satellite reception system and/or
a DVB-T antenna, select “Yes” for
the related operation mode or both
operation modes to be able to start a
search for the related operation mode
at the end of the fi rst installation.