Kenwood KRC-X858 - Manual (Page 39)

• 4/¢ buttons
Press the 4 button to search through the tracks backward.
Press the ¢ button to search through the tracks forward.
Use to move the cursor while entering disc name.
• DISC buttons
Press the DISC
–
button to search through the discs backward.
Press the DISC
+
button to search through the discs forward.
Select numbers and symbols while entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button
Enters and cancels the Disc Name Preset Play mode.
• Number/ letter entry buttons (KRC-X858 only)
Used to specify the track (disc) number used in direct track
(disc) searches.
Use to enter letters during disc name preset.
External disc control features
• AM button
Rewinds the tape.
• FM button
Fast forwards the tape.
• 38 button
Plays the reverse side of the tape. When pressed during fast
forward and rewind, this button stops the tape and starts playing
it.
• Number/ letter entry buttons (KRC-X858 only)
Use to enter the number of tracks you want to skip used in
DPSS.(#1-9)
— 39 —
KRC-X858_U.S-4 00.12.27 0:13 PM Page 39