Kenwood KRC-X858 - Manual (Page 25)

Function of the KRC-X858
Using the remote, directly input the disc number that you want
to listen to.
Using the number buttons on the remote, input the number of
the disc that you want to listen to.
The selected disc number will blink in the display for 10
seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be canceled.
• Input "0" to select disc 10.
• If you input more than two numbers all at once, a search will be
made only of the last number input.
Press either the DISC
+
or DISC
–
button while the number
inputted is blinking.
The disc starts playing.
Canceling Direct Disc Search While It Is Operating:
Press the 38 button.
2
NOTE
1
Direct Disc Search (Function of disc changers with remote)
Function of the KRC-X858
Using the remote, directly input the track number that you
want to listen to.
Using the number buttons on the remote, input the number of
the track that you want to listen to.
The selected track number will blink in the display for 10
seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be canceled.
Press either the 4 or ¢ button while the track number is
blinking.
The track starts playing.
Canceling Direct Track Search While It Is Operating:
Press the 38 button.
You cannot use the direct track search function while doing track
or disc scans or using random or magazine-random play.
NOTE
2
1
Direct Track Search (Function of Remote)
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
Press the DISC
+
button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.
"LOAD" is displayed when discs are being exchanged on the disc
changer.
NOTE
— 25 —
KRC-X858_U.S-4 00.12.27 0:13 PM Page 25