Konica Minolta DiMAGE X31 - Manual (Page 40)

DRIVE MODES
Single-frame advance - to take a single image each time the shutter-release button is
pressed. This is the camera’s default setting.
Self-timer - to delay the release of the shutter (p. 41). Used for self-portraits.
Continuous advance - to take multiple images when the shutter-release button is
pressed and held (p. 42).
Multi frame - to create a composite image of a nine-frame series when the shutter-
release button is pressed once (p. 43).
40 R ECORDING - ADVANCED OPERATION
The drive modes control the rate
and method images are captured.
Indicators indicating the selected
drive mode appear on the monitor.
The drive mode is set in the main
menu of the recording mode (p.
36). If auto reset (p. 55) is active,
the drive mode is reset to single-
frame advance when the camera is
turned off. Drive modes can be assigned to the controller with
controller customization (p. 54).
Drive mode