Konica Minolta DiMAGE X31 - Manual (Page 20)

20 G ETTING UP AND RUNNING
SETTING THE DATE AND TIME
After initially inserting a memory card and charging the battery, the camera’s clock and calendar
must be set. When images are recorded, the image data is saved with the date and time of record-
ing. The date and time may also have to be set when changing batteries if the clock and calendar
reset. Depending on the region, the menu language may also have to be set. To change the lan-
guage, see the camera notes on the following page.
Turn the camera on by pressing the main switch
near the shutter-release button (1).
The set-date-and-time message appears on
the LCD monitor. Select “Yes” by pressing
the controller.
Controller
Set date and time.
No Yes
1