beautypg.com

Kohler Discovery User Manual

Page 16

background image

16

2.3 Mark the positions of the fixing screw

holes on the wall.

2.4 For solid walls drill two 6 mm holes for

the wall plugs.

2.5 Fit the wall plugs (supplied) and fix the

shower valve to the wall with the
securing screws (supplied).
Note! For stud partition installations
alternative fixings may be required (not
supplied) to fix the shower valve to the
rear face of the wall cavity or to a
timber noggin.
Important! At this point position the
building-in shroud onto the shower
valve and make sure that it is level,
both horizontally and vertically.

2.6 Refer to section: ‘1. Solid Wall or

Stud Partition Installation (Using
Securing Brackets - Mounting off
Front Face)’
and follow instructions 11
to 18.

Hot Supply

Cold Supply

Outlet Pipe
to Fittings

Securing
Screw