beautypg.com

Kohler Discovery User Manual

Page 14

background image

14

1.14Re-fit the building-in shroud to the shower valve using the three fixing screws.
1.15Using the building-in shroud as a guide for the finished wall thickness, finish the

wall.
Caution! Make sure that the finished wall is within the minimum and maximum
limits otherwise the control components will not fit correctly.

1.16Remove the building-in shroud. Retain the three securing screws for securing the

backplate.

1.17Fit the shower fittings, refer to your fittings installation and user guide for

instructions.

1.18Fit the control assembly, refer to section: ‘Control Assembly’.

Securing
Screws

Building-in
Shroud

Spirit Level

Maximum
Building-in Depth

Minimum
Building-in Depth