Konica Minolta 7020 - Manual (Page 43)

43
9. Special Functions
9.2.8 Special Originals
In this screen different modes can be selected to obtain the
optimum copying result according to the original type. Some
modes are incompatible.
Single pages are combined on the front and back of copies in
such a way, that you only need to fold the copied set in the
center to have a booklet with correct page order. The booklets
can be A4 size (folded A3 copies) or A5 size (folded A4 copies).
9.2.7 Booklet Mode
Mixed Originals
If this function is active, you can position originals of the
following mixed sizes together in the RADF
* :
– A3, B4, A4R, A4, B5, and A5; or
– A4R, B5R, and A5; or
– B5R and A5R
You have two options for the size of the copies:
– APS is automatically active, so that each copy will be identical
in its size to the corresponding original.
– If you want all copies to have the same size, select the required
size (e.g. A4). Each original will then be copied with the
corresponding magnification ratio onto the specified copy size.
– Press the function key. This will also activate 1 3 2. For
double-sided originals you have to change this to 2
3 2.
– A4 copy size is automatically selected (for a booklet in A5
size). For an A4 booklet you have to select A3 copy size.
– Position originals in the RADF. If you want to position your
originals on the platen glass, select the Store Mode and scan
each original by pressing the SCAN key.