Kenwood KRC-709 - Manual (Page 28)

• 4/¢ (TUNE) buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the
¢ button to make increasing seeks (using the preset
tuning mode).
Use to move the cursor left or right during station name input.
• AM/FM buttons
Press the AM button to select the AM band.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
During station name input, selects digits and symbols.
• OK button
During station name input, stores the already input data in
memory and ends the input mode.
• 38 button
Selects the type of characters at the time of entering the station
name.
Tuner features
• VOLUME buttons
Press the
+
button to turn the volume up.
Press the
–
button to turn the volume down.
• SRC button
Each time you press the SRC button, the mode switches as
follows:
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• To enable the selection of External disc control mode 2/AUX
mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
During the AUX mode, "AUX" (or AUX-name display) will show
in the display.
When the CA-C1AX is being used, the AUX Mode will replace
the External Disc Control Mode.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
NOTE
▼
Tuner mode
▼
Tape mode
▼
External disc control mode 1
▼
External disc control mode 2 / AUX mode
▼
Standby mode
Basic operations
Basic Operations of remote
— 28 —
English
KRC-709_U.S_m2 00.12.26 3:30 PM Page 28