Karcher SHD-R 3000 - Manual (Page 11)

English SHD-R 3000
5.956-486 A2005937 (06/03) B3
B. Types of system, and operating information
Cleaning liquids
Type of system
(see rating plate) Cleaning liquid Working
pressure/
Pressure
setting for
safety valve
[bar]
Comments
SHD-R 3000 (F) SSR - Water
- VE -water
- Water with
Kärcher-RM
- Acids 1)
- Alkali
solutions 2)
85/100 - The pistons are made
from ceramic materials,
other pump parts that
come into contact with
acids are made from
stainless steel.
- Ex-versions possible.
VE Fully demineralised water
RM RM Alkali cleaning agent: e.g. RM31 (max. 0 - 2%)
Acidic cleaning agent: e.g. RM25 (max. 0 - 1%)
Max. temperature + 60 ˚C
(Higher temperatures available on request - precompression pump required!)
1)
Caution!
Increased material removal in hydrochloric and sulphuric acid, therefore rinse/neutralise
immediately after use!
Reduced resistance against contaminated acids!
If necessary contact Kärcher!
Acids (max. temperature + 20 ˚C)
Nitric acid max. 10%
Acetic acid max. 10%
Formic acid max. 10%
Phosphoric acid max. 10%
Citric acid max. 10%
Sulphuric acid max. 0.5%
Hydrochloric acid max. 0.5%
2) Sodium hydroxide solutions max. 10%, without hypochlorite fractions (max. temperature
+ 20 ˚C)
Potassium hydroxide max. 10%, without hypochlorite fractions (max. temperature + 20 ˚C)
(F) Mobile system
Other cleaning liquids may only be used after being released by Kärcher!