KORG C-320 - Manual (Page 39)

Assembling the stand 37
6 Attach the instrument.
Position the screw heads protruding from the inside of the left and right sides of the
stand, so that they are aligned with the grooves of the metal fitting at the left and
right ends of the instrument, and gently lower the instrument onto the stand. If the
instrument is aligned correctly, the screws on the inside of the side panels will fit
firmly into the grooves of the metal fittings.
You can perform this step more easily if you use your body to apply pressure to the
side panel of the stand while sliding the instrument onto the stand.
Note: Carefully lower the left and right ends of the instrument evenly, keeping the
instrument level, and being careful not to pinch your hand or drop the instrument.
Note: The side panels are easily scratched; please use caution.
Screw head
Groove