KORG C-320 - Manual (Page 20)

18 Chapter 3
1 Hold down the REVERB or CHORUS button, and press either the PIANO 1/L,
PIANO 2/M, or E.PIANO1/H sound selection button to select the reverb or chorus
depth.
2 To check the currently selected reverb or chorus depth, hold down the REVERB or
CHORUS button, and look at which of the indicators is turned on.
3 To turn the reverb or chorus off, press the REVERB or CHORUS button. The indi-
cator on the button will turn off.
Using the pedals
The C-320 has three pedals: soft, sostenuto, and damper. You can use these pedals to
add expression to your playing, as on a traditional piano.
Soft pedal. Pressing this pedal will make the tone softer. You can control the soft-
ness of the tone by how far down you press the on pedal (“half-pedaling”).
Sostenuto pedal. Pressing this pedal will apply the damper effect only to the
notes that are already being held down on the keyboard, and will sustain only those
notes. The damper effect will not be applied to any additional notes that you play
while holding down the Sostenuto pedal.
Damper pedal. Pressing this pedal will sustain the sound, producing a richly reso-
nant decay. You can control the damper depth by how far down you press the on
pedal (“half-pedaling”).
Button Reverb depth Chorus depth
PIANO 1/L Light reverb Light chorus
PIANO 2/M Normal reverb Normal chorus
E.PIANO 1/H Deep reverb Deep chorus
Soft pedal
Sostenuto pedal
Damper pedal