Kodak A-61597 - Manual (Page 14)

12 A-61591 / Part #9E8651 January 2008
6. Remove the protective tape from the bottom of the printer cartridge
to expose the print head.
NOTE: The photo above is for illustrative purposes only. When
removing the tape from the printer cartridge the print head
should be facing down.
7. Place the new printer cartridge in the printer carrier and snap it into
place.
8. Close the blue tab to hold the printer cartridge securely in place.
9. Close the print access cover and replace the output tray.
10. Run a print test.
Storing the printer
cartridge when not in
use
The maintenance station is provided to store your printer cartridge
when the High-Resolution Printer is not in use.
Proper printer cartridge
storage is important for prolonging the life of the printer cartridge and to
keep it from drying out.
NOTE: The maintenance station can be mounted on the scanner for
easy use and access.
1. Remove the printer cartridge from the scanner. See the procedures
in the section entitled, “Installing a new printer cartridge”.
Print head